PE 100 pipes – PE-HD pressure pipes EN 12201
PE 100 is the standard material for plastic pressure pipes – tough, impact-resistant and durable. Ideal for drinking water, gas and wastewater, including trenchless (no-dig) installation. ROHRLINE supplies PE 100 pipes and tubes to EN 12201 and EN 1555 – worldwide.
Application & properties
PE 100 is the standard material for plastic pressure pipes – tough, impact-resistant and durable. Ideal for drinking water, gas and wastewater, including trenchless (no-dig) installation.
- Drinking-water lines (EN 12201)
- Gas lines (EN 1555)
- Wastewater and industrial lines
- Trenchless installation with PE 100-RC
Tell us the medium, temperature and pressure – we will check the grade with you.
Material properties
Typical values for first orientation. The standard and the delivery data sheet are decisive.
| Property | Value |
|---|---|
| Density | 0.95–0.96 g/cm³ |
| Yield stress σ | ~ 23 N/mm² |
| E-modulus (short-term) | ~ 900–1,100 N/mm² |
| MRS (minimum required strength) | 10 MPa |
| Thermal conductivity | ~ 0.38 W/(m·K) |
| Thermal expansion α | ~ 0.18 mm/(m·K) |
Standards, jointing & product forms
| Topic | Detail |
|---|---|
| Standards | EN 12201 (drinking water), EN 1555 (gas), DIN 8074/8075, EN ISO 15494 |
| Jointing | Butt fusion and electrofusion welding to DVS 2207-1, flange joints |
| Dimensions | d 16 – d 2000 mm · SDR 41–SDR 7.4 · up to PN 25 |
| Short name / aka | PE-HD · polyethylene · MRS 10 |
We supply PE 100 as a complete plastic piping system – pipes, fittings, valves and welding technology, on request including installation and welding service.
Supply programme & machining
| Item | Details |
|---|---|
| Scope of supply | Pipes, fittings, flanges and valves from a single source |
| Minimum quantity | From a single item – from one fitting piece to the complete piping system |
| Availability | Common grades and sizes available at short notice, special sizes procured per project |
| Lead time | Standard sizes usually 3–5 working days; the binding date is confirmed with the quote |
| Certificates | Manufacturer’s works certificate and test reports on request |
These figures describe our supply programme. Which size is actually available in this grade is clarified with your enquiry – you usually receive the quote the same day.
We clarify availability, price and inspection certificate with your enquiry.
Frequently asked questions about PE 100
Up to what pressure can PE 100 be used?
Depending on wall thickness (SDR) up to PN 25 – at 20 °C over a 50-year service life. PE 100 has a minimum required strength (MRS) of 10 MPa.
How is PE 100 jointed?
By fusion: heated-tool butt welding or electrofusion couplers – permanently tight without gaskets.
What is PE 100-RC?
A particularly crack-resistant (Resistant to Crack) grade for trenchless and sand-bed-free installation.
Which dimensions and certificates does ROHRLINE supply for PE 100?
ROHRLINE supplies PE 100 in the following range: d 16 – d 2000 mm · SDR 41–SDR 7.4 · up to PN 25. Documentation: Manufacturer’s works certificate and test reports on request. Delivery worldwide; the binding date is confirmed with the quotation.
Request PE 100?
Medium, pressure, temperature, size and quantity are enough – we recommend the material and supply the complete system including fittings and welding technology.
All data are typical values for first orientation – without warranty. The applicable standard and the delivery data sheet/certificate are decisive.